Industrial machine mirror B 20

It is made of high-speed steel, known for its superior strength and high resistance to heat generated by continuous friction, ensuring the cutter edge remains sharp for extended periods of continuous operation.

This foot is designed for industrial sewing machines with a straight stitch, and it is the magic tool for making ruffles quickly and professionally.

The part directly responsible for the quality and balance of the bottom stitch with the upper needle thread is distinguished by the presence of a spiral tail at its front called the thread guide, which makes it specifically designed for embroidery. This guide works to pass the bobbin thread in a fixed path, preventing the oscillation and vibration that usually occur due to the high speeds of the machine, which may exceed eight hundred stitches per minute.

It is a long, thin plier,made of stainless steel to ensure strength and prevent bending, and is mainly used to handle overlock machines, which are characterized by the complexity of their thread paths.

This foot pedal is used to sew beaded, pearl, crystal, or chain ribbons onto fabric. Instead of sewing each bead individually by hand, the pedal secures the ribbon with a single press and at high speed.

The 1.6mm hex screwdriver is a vital and essential tool in the maintenance and operation of industrial sewing machines with interlocking fasteners, as its main role is to loosen and tighten the small, recessed hex screws that hold the needles in place with high precision.

It is used to make a perfectly straight stitch along the edge of the fabric at a very constant distance. Its advantage is the presence of a "bumper" or "edge" that slides alongside the edge of the fabric or alongside the seam fold, ensuring that the line does not slant to the right or left.

The "bibe" or "cordon" fitting, designed for industrial sewing machines, is a sturdy metal piece with a precise, quarter-inch-wide lower groove to allow the threaded cords to pass evenly under the needle. Its primary function is to cover the cords with fabric and sew them onto the edges of upholstery, cushions, and clothing.

The oil filter in industrial overlock machines (such as Juki, Siruba, Jack, and others) is the beating heart of the protection system; it is responsible for keeping the delicate mechanical parts running smoothly without sudden wear.

The compensatory foot is a professional tool designed for industrial sewing machines to ensure perfectly straight sewing lines parallel to the fabric edge. Its design incorporates a movable side with an internal spring that allows it to adapt to height differences between different layers of fabric, making it ideal for finishing collars, pockets, and garment hems with extreme precision.

Installing zippers that do not show their stitching from the outside (often used in evening dresses, skirts, and high-end cushions).

This foot pedal is available in two opposing versions, the left version and the right version. The main function of this variation is to give the tailor the freedom to choose the direction of the needle's passage with respect to the protrusion of the zipper or cord to be sewn. The left foot pedal allows the needle to pass from the left side, while the right foot pedal does the exact opposite, which makes it easier to work on different angles and directions of the fabric without the need to turn the piece completely over or change the natural sewing path. This balance between the two sides ensures extreme accuracy in fixing the "cords" and zippers from both sides in a symmetrical and professional manner.